|
|
 |
|
 |
|
Download Datasheet for
TymServe™2100 |
TymServe 2100 simplifies the task of implementing
and maintaining an enterprise network
synchronization system, offers better timing
accuracy, decreases security risk and provides a
lower cost of ownership.
Self-contained
Network managers and system integrators appreciate
the fact that the TymServe 2100 is a complete time
server in a convenient, self-contained
rack-mountable unit. Configuration can be done via
the front panel keypad, the RS-232 console port or
the 10BaseT network connections.
Accurate
Uses UTC (Universal Coordinated Time), the
international standard, to keep computer clocks
accurate within 1/10th of a second per year.
Flexible
Acquires UTC from a variety of sources, including
GPS satellites, autodial to NIST (National
Institute of Standards and Technology), and other
methods. GPS: The GPS configuration offers a
revolutionary concept in network synchronization.
GPS satellites continually pass overhead providing
an easily accessible source of UTC time for each
remote campus equipped with a TymServe.
Secure
Distributes time within network via NTP (Network
Time Protocol) with no need to breach the
firewall.
Authenticated
Provides extra assurance, via MD5 authentication,
that only authorized devices are accessing your
systems via NTP.
Integrated
Can be managed from an integrated management
console. Outputs include NTP, IRIG, IPPS and
Sysplex.
Easy to
use
Allows user to setup and manage equipment with
front panel switches, Telnet, SNMP-enabled console
or the web. In addition, the unit has IRIG time
code, 1 PPS and 10 MHz reference inputs and
outputs. Network management tools include Simple
Network Management Protocol (SNMP) with a custom
MIB II extension, remote Telnet access, Dynamic
Host Configuration Protocol (DHCP), and MD5 access
authentication.
Cost
Effective
Initial TymServe cost savings come from its simple
configuration and installation relative to
configuring a conventional workstation as a time
server. Savings continue with the elimination of
network synchronization management and software
upgrade costs.
|
Features
|
- Stand-alone
NTP Time Server
- 1U Height,
Rack-Mountable Unit
- Simple Network
Management Protocol
- Convenient
Front Panel Display
- Versatile
Input/Output
- Ethernet
10BaseT Interface
- Telnet and
RS-232 Remote Programming
- IRIG Time Code
Input/Output
- Two-Year
Warranty
|
- Independent
Time Acquisition From: GPS, IRIG, CDMA, or
Dial-up Service
- 1 PPS TTL/CMOS
Output 10 MHz Output
- Highly
Accurate
- Security (more
secure timing source)
- Low
Maintenance
- RSA Keon®
Ready
- RSA SecurID®
Ready
|
TymServe™2100
Specifications
|
Inputs
Time Code: BNC IRIG A, IRIG B,
(Modulated 2:1 to 6:1)
500 mV to 10 V p-p, >10K½
DB9 IRIG A, IRIG B,
Differential TTL, DCLS, 1K½
1 PPS: HD-15 TTL, Active rising or falling
GPS: SMA Antenna / Preamp
CDMA: SMA Antenna/Receiver
Serial Port/Modem: NIST ACTS Dial-up
Outputs
Time Code: BNC IRIG B, Modulated 3:1, 3V p-p, 75½
DB9 IRIG B, Differential TTL, DCLS, 50½
1 PPS: BNC TTL, Rising edge on-time, 50½
Frequency: BNC 10 MHz, 50½
Square wave with VCXO
Since wave with OCXO
and Rubidium
Input/Output Connections
Network: 10Base T Ethernet
Serial Port A: RS-232 / DB9 DTE,
Sysplex Timer, Ext. Modem
Serial Port B: RS-232 / DB9 DCE,
Configuration and status
Front Panel Keypad: 0 to 9, Menu
Display: LCD, 2 x 40 character
Indicators: LED, ‘Locked’, ‘Tracking’, ‘Power
Supported Network Features
TCP/IP
NTPv2 (RFC 1119) & NTPv3 (RFC 1305)
SNTP (RFC 1361)
Daytime Protocol (RFC 867)
Time Protocol (RFC 868)
SNMPv1 w/ Custom MIB II Extension
MD5 Authentication (NTP)
DHCP & TFTP
Telnet
NIST Automated Computer Time Service (ACTS)
HTTP/HTML Status Page
Software
NTP Client: www.ntp.org
MS Windows Time Utility:
www.trusted-time.com
|
Environment
Power: 95 to 265 VAC, 47 to 63 Hz, 20 W
Size: 1.75"h X 17"w X 9.5"d (standard)
(4.45cm X 43.18cm X 24.12cm)
1.75"h X 17"w X 12"d (rubidium)
(4.45cm X 43.18cm X 30.48cm)
Operating Temperature: 0° to +50° C
Relative Humidity: 0 to 95% (non-condensing)
Weight: <10 lbs; (<4.5kg)
Timing Accuracy
Network: 1-10 milliseconds, typical
GPS: <1 microseconds, relative to UTC
IRIG B Time Code: <5 microseconds, relative to
code
Dial Up Service: <10 milliseconds, on sync
CDMA Digital Receiver: <100 milliseconds
Frequency Stability
VCXO (standard) 1 X 10-8 /day aging
OCXO (optional) 3 X 10-9 /day aging
Rubidium (optional) 5 X 10-11 /month aging
GPS Receiver Eight channel, C/A code
Antenna Size: 3.04"d X 2.94"h
(7.72cm X 7.47cm)
Antenna Operating Temp.: -40° to +85° C
Acquisition: <5 minutes
Cable Type: 50 ft. (15.25m) / RG58
Antenna Size: 3.04"d X 2.94"h
(7.72cm X 7.47cm)
Antenna Operating Temp.: -40° to +85° C
Acquisition: <5 minutes
Cable Type: 50 ft. (15.25m) / RG58
Options
- GPS
- High Gain
Antenna
- Extended
Length Antenna Cable
- In-Line
Amplifier
-
Antenna/Receiver
- -48 VDC Power
Supply
- Lightning
Arrestor
- CDMA Receiver
- Oscillators
- Ovenized
- Rubidium
Note
IRIG A and B time code input support
IEEE-1344 Leap Second, Year and Time Figure of
Merit enhancements.
|
|
|
|
|
|
|
|
|
|
